The ShowNoticeAction subclasses were cut-n-pasting a lot of prepare() code from ShowNoticeAction, though the only part that's different is how we look up the notice. Broke that out to a getNotice() method, so only that needs to be copied. Avoids extra copies of permission checks and other common code in this spot.
Notice::saveNew() now does these checks directly when making a repeat:
* make sure the original is valid and existing
* stop you from repeating your own message
* stop you from repeating something you've previously repeated
* prevent repeats of any non-public messages
* explicit inScope() check to make sure you can read the original too (just in case there's a funky extension at play that changes scoping rules)
These error conditions throw exceptions, which the caller either uses as an error message or passes on up the stack, without having to duplicate the checks in each i/o channel.
Numbered parameters when more than one used in a message.
L10n updates for consistency.
i18n for non-translatable exception.
Updated translator documentation.
Removed superfluous whitespace.
We disallow repeating a notice (or whatever) if the scope of the
notice is too private. So, only notices that are public scope
(available to everyone in the world) or site scope (available to
everyone on the site) can be repeated.
Enforce this rule at a low level in Notice.php, and in the API,
commands, and Web UI. Repeat button doesn't appear on tightly-scoped
notices in the Web UI.
like leprous boils in our code. So, I've replaced all of them with //
comments instead. It's a massive, meaningless, and potentially buggy
change -- great one for the middle of a release cycle, eh?
Note that the other modification -- of the repeat line -- is still going to be inconsistent between things originally on the page and anything that comes over Realtime.
If display_errors is on, typical settings would cause PHP error messages to spew to output before the HTTP headers for setting a 400 error go through.
Also switched from deprecated static DOMDocument::loadXML() to non-static call.
If display_errors is on, typical settings would cause PHP error messages to spew to output before the HTTP headers for setting a 400 error go through.
Also switched from deprecated static DOMDocument::loadXML() to non-static call.
Was triggering errors due to use of common_canonical_nickname() on arbitrary input without checking for exceptions about invalid nicknames (which didn't exist long ago in the before time)
Was triggering errors due to use of common_canonical_nickname() on arbitrary input without checking for exceptions about invalid nicknames (which didn't exist long ago in the before time)
UserActivityStream -- used to create a full activity stream including subscriptions, favorites, notices, etc -- normally buffers everything into memory at once. This is infeasible for accounts with long histories of serious usage; it can take tens of seconds just to pull all records from the database, and working with them all in memory is very likely to hit resource limits.
This commit adds an alternate mode for this class which avoids pulling notices until during the actual output. Instead of pre-sorting and buffering all the notices, empty spaces between the other activities are filled in with notices as we're making output. This means more smaller queries spread out during operations, and less stuff kept in memory.
Callers (backupaccount action, and backupuser.php) which can stream their output pass an $outputMode param of UserActivityStream::OUTPUT_RAW, and during getString() it'll send straight to output as well as slurping the notices in this extra funky fashion.
Other callers will let it default to the OUTPUT_STRING mode, which keeps the previous behavior.
There should be a better way to do this, swapping out the stringer output for raw output more consitently.
file_quota is adjusted from the defined value to take into account the maximum upload size limits in PHP, or cropped to 0 if uploads are disabled.
This can be used by client apps to determine maximum size for an attachment.
Search highlighting was being done with a regex on raw HTML text, followed by a second regex undoing replacements within double-quoted attribute values.
This broke on imported Twitter messages, as the way we generate the markup uses single quotes on the attributes, which didn't get matched by the second regex.
I've replaced this do-then-undo cycle by dividing up the import HTML into freetext spans and tags; the freetext gets replaced, while the tags are left untouched.
* 0.9.x:
* update translator documentation. * remove superfluous whitespace. * tab to spaces. * add FIXME for undocumented class.
* update translator documentation. * remove superfluous whitespace. * L10n updates. * small refactoring in publicrss.php. * remove PHP4-isms
Localisation updates from http://translatewiki.net.
Double quotes to single quotes.
* improve L10n consistency for English. For example proper punctuation for all button and label titles. * fix some i18n bugs (in-message variables). * update/add translator documentation. * remove superfluous whitespace.
add path separators for Plugin::path()
argument to send email summary to all users on all sites
fix indentation in siteemailsummaryhandler
fix indentation in sendemailsummary.php
fix indentation in Email_summary_status.php
fix indentation in EmailSummaryPlugin.php
fix indentation in usermailsummaryhandler.php
The ShowmessageAction was using the MailboxAction to do its display of
a single direct message. Since we redid the nickname management, this
was breaking (MailboxAction requires a nickname argument,
ShowmessageAction does not, and nickname validation that used to
quietly fail now throws an exception).
I've moved the message list processing to its own widget class, so the
need to subclass MailboxAction has disappeared. I've rewritten this
action to use the MessageListItem widget, and it works fine now.
Our mailbox actions (inbox and outbox) were doing their own display of
messages. This was causing issues with especially showmessage, which
since the more rigourous nickname checks were added, no longer works as
a mailbox subclass.
I've taken the time to rip out the message listing code from MailboxAction
and moved it to a MessageList widget. The different mailboxes now have their
own subclasses that show the correct profile in the list.
In order to apply to PHP's POST processing, the MAX_FILE_SIZE field must appear *before* the file upload field. They were incorrectly placed after, where they had no effect on POST processing.
Part of the reported issue was previuosly fixed by dc497ed0 (smaller size images being blanked).
This commit fixes the remaining bug with original-size avatars being left as BMP (which could include the 96px size for instance, which could cause problems in browsers not supporting BMP natively)
Added ImageFile::copyTo() as a convenient alias for resizeTo() when not resizing; this performs the BMP/XPM/XBM->PNG conversion if needed, or copies the original file.
Copying instead of using move_uploaded_file() is fine here since:
a) the files are cleaned up on script completion anyway (vs moving to remove it)
b) we're already performing getimagesize() and possibly load/resize on the file before this point (vs needing to move the file into a usable area to work with open_basedir restrictions that prevent working directly with uploaded files in the temp dir; since this would fail anyway, we lose nothing)
ImageFile::preferredType() now works on $this->type instead of asking for one, to make it handier to use from outside. (This is still needed in order for calling code to generate a target filename.)
Recommended for future:
* additional consolidation between the various ways of uploading avatars (touched avatarsettings, grouplogo, and apiaccountupdateprofileimage with similar minor changes)
* consolidate type checks and file naming into Avatar class
There's a new menu layout in this version of the software. It was
implemented as a plugin in 0.9.x to avoid clashes with existing themes,
but we're going to break that compatibility in this version, so we're just going for it.
This change involved moving all the changes in NewMenuPlugin into the
default code that was calling it. In addition, since
accountsettingsaction and connectsettingsaction differed only by menu,
I removed them, changed all references to them to the settingsmenu, and moved
the combined nav to its own class.
Let's put that episode behind us.
The CSS shim that was loaded by NewMenuPlugin for certain themes and certain actions
was removed.
L10n updates
Remove superfluous whitespace
Number parameters in message when two or more are used
ClientException and ServerException should end with a period
* 'testing' of gitorious.org:statusnet/mainline: (63 commits)
Add a scary 'experimental feture' warning & are-you-sure prompt on moveuser.php
fix wrong datatypes (saving string instead of array) in AtomPub notice processing
Account moving is a background activity
return a 409 Conflict when subscription already exists
OStatusPlugin does discovery in Profile::fromURI()
considerably more logging and error checking in AccountMover
add a log method to AccountMover
normalize accounts and check for return in HTTP for moving
move account-moving classes to their own libraries
execution protection on discovery.php
PHPCS discovery.php
Move discovery library from OStatus plugin to core
Revert "Revert "0.9.7alpha1""
first example of moving a user
Parse properties of links in XRD files
Add the Atom username to the XRD output
preserve activities in object
let callers pass in an XMLOutputter to output to
execution protection on discovery.php
PHPCS linkheader.php
...
Removed the free calls (unneeded since destructors now work), and added an error check w/ logging & an exception for future attempts to forward calls to nonexistent object.
* adds Right::CREATEGROUP
* logic in Profile::hasRight() checks for silencing
* NewgroupAction checks for the permission before letting you see or process the form in the UI
* User_group::register() logic does a low-level check on the specified initial group admin, and rejects creation if that user doesn't have the right; guaranteeing that API methods etc will also have this restriction applied sensibly.
* avoid PHP notice from using wrong variable
* show a visible error instead of blank screen if no file submitted with restore form
* avoid PHP strict warning from using calling "non-static" DOMDocument::loadXML statically
* suppress PHP warning from XML parse errors
The new DeleteaccountAction lets a user delete their own account
(subject to global rights set by the admin). It presents a form to
delete the account, with an "I am sure." text entry box.
It then schedules the account for deletion and logs the user out.
Feed for group memberships, in activity streams format.
Shows a feed; has proper pagination; accepts activitystreams "join"
activities to start a new membership.
common_shorten_links() can only access the web session's logged-in user, so never properly took user options into effect for posting via XMPP, API, mail, etc.
Adds an optional $user parameter on common_shorten_links(), and a $user->shortenLinks() as a clearer interface for that.
Tweaked some lower-level functions so $user gets passed down -- making the $notice_id param previously there for saving URLs at notice save time generalized a little.
Note also ticket #2919: there's a lot of duplicate code calling the shortening, checking the length, and reporting near-identical error messages. These should be consolidated to aid in code and translation maintenance.
Now, when you first come up the checkbox will most likely be off and the button to create an address is grayed out.
Checking the box enables use of the 'new' button to generate an email address -- it's left disabled until you check the box, so you can't accidentally trip it.
Actually adding the address now enables the post-by-mail option, as well, thus ensuring that it's saved. WARNING: OTHER CHANGES ON THE FORM WILL STILL BE LOST.
Removing the address now disables the post-by-mail option, so it's not sitting around confusingly enabled but useless.
You can still disable the checkbox manually without removing the address, in case you want to keep it for later.
It's also still possible to actually save it in the state where the option is enabled, but there's no configured address, but that shouldn't happen too often. Possibly that should be prevented outright though.
max_id is not yet implemented, as it'll need support added to the search backends. (since_id we get 'for free' by just cropping off the list, it'll do for now)
